The Hign Speed Rolling Shutter Door consists of two sets of photoelectric cells which should be set to be 150 mm high from the ground, and the other set to be 450 mm high from the ground. Provide split prices for non-contact button sensors on both sides.
The PVC fabric thickness of the High Speed Rolling Shutter Door is 0.8mm / 1.2mm / 2.0mm thick. Can have a transparent window. And free installation of strip-shaped transparent PVC windows 1.4-2.3m. The outer layer of the fabric contains a high-strength PVC coating, the transparent yellow curtain has a thickness of 0.8mm / 1.2mm / 2.0mm, and has a wind resistance of 5000N. The matched motor can be installed on the left or right according to the needs of the customer.
The High Speed Rolling Shutter Door is equipped with a special motor for fast doors: 0.75KW / 1.5KW / 2.2KW / 220V / 50HZ, powerful, durable and easy to use.
The door frame is laser cut and painted to have a bright surface. Using high-quality hot-dip galvanized sheet and frame, 2.0mm thickness track.
Components / devices of a complete Fast PVC Roller up door configurations:
The curtain is made of colorful high-density polyester fiber (1.0,1.2,2.0mm thick option) or full-transparent curtain (thick 1.5mm)
B:Door frame is formed by laser cutting
Drive dedicated motor power: 0.75-3KW; voltage 220V/380V,
The IP65 control box is compatible with commonly used protection devices; the whole uses PLC digital programming to realize the safe passage of personnel vehicles and articles,parking manual lever for easy to open or close
E:Operating & closing speed
Upward 0.5~2.5m/s, down 0.6~1.0m/s, and the inverter can be adjusted the required uplink and downlink speed according to actual requirements.
Anti-wind rods:Aluminium steel tubes
Photoelectric/infrared safety protection:Double sides photo-electric safety device protection or top radar reaction.door stop going down to go upside.
Radar or loop motion sensor:To help opening and closing
Safety bottom :To protect objects at the bottom when door going down
Switch mode:Manual buttons Triplex or touchless motions sensor
Max.sizeWidth 15m x height 15m
HS special motor:0.75KW/1.5KW/2.2KW/220V/50HZ
Difference in Pressure :50 Mpa.
Side rail material:galvanized or 304 S/S steel.High speed Industrial Door manufacturers